1. Home
  2. Products
  3. Chemical Pump

Chemical Pump

Product name: Chemical pump
Flow: 6.3-400m3/h
Head scope: 5-125m
Power: 0.5.5-90kw
Rotational speed: 2900r/min and 1450r/min
Pump inlet diameter: 50mm-200mm
Maximum working pressure: 1.6Mpa

Product applications
The chemical pump is widely applied in industrial uses, including urban water supply and drainage. It can convey mediums with chemical properties similar to chemical liquids.

Parameters
Type Speed Flow Head Power Kw Eff NPSHr Impeller

rpm m3/h m Shaft Motor % m mm
IH 50-32-125 2900 12.5 20 1.13 2.2 60 2 130
1450 6.3 5 0.16 0.55 54 2 130
IH 65-50-125 2900 25 20 1.97 3 69 2.5 130
1450 12.5 5 0.27 0.55 64 2 130
IH 80-65-125 2900 50 20 3.63 5.5 75 3 137
1450 25 5 0.48 0.15 71 2.5 137
IH 100-80-125 2900 100 20 7 11 78 4.5 139
1450 50 5 0.91 1.5 75 2.5 139
IH 125-100-200 2900 200 50 33.6 45 81 4.5 216
1450 100 12.5 4.48 7.5 76 2.5 216
IH 150-125-315 1450 200 32 22.08 30 79 2.5 32.5
IH 200-150-250 1450 400 20 26.6 37 82 4.6 199
Spectrum diagram

Use conditions
1. The motor rated voltage is 380V (660V), frequency is 50HZ three-phase alternating current
2. Transported medium temperature at -20 degrees Celsius ~105 degrees Celsius
3. Conveying chemical liquid medium
4. PH level: 1~10 (choose materials according to different medium)
5. temperature: generally 20 ~ 105 degrees Celsius

Drive form: Motor, diesel engine

Seal form: Packing seal, mechanical seal

Material selection
We offer a wide range of materials, including stainless steel, two-way stainless steel and fluoroplastic.

Structure diagram

Pump compositions
The pump head is comprised of the pump body, impeller, seal ring, impeller nut, pump cover, sealing components, middle bracket, shaft and suspension components.

Part Description Material Specification
Pump Casing Stainless Steel
Impeller Stainless Steel
Sealing ring Stainless Steel
Impeller nut 2Cr13
Pump Cover Stainless Steel
Seal part Stainless Steel
Mid bracket Cast Iron
Shaft 2Cr13
Hanging Stand Cast Iron
Packing PTFE
Mechanical Seal Hard Alloy
Bolts Zinc Plated Steel

Structural advantages
Shaft seal: the shaft seal is available as either seal packing or a mechanical seal, and the two seal pump covers are universal.
Suspension components: the suspension components are universally designed and all pump body systems function independently of each other. Suspension parts can easily be replaced by substitutes for the same function if needed.
Materials: the main flow parts (pump terms, mainly refers to pump body, impeller) are manufactured using stainless steel in order to meet different medium transportation needs and a long service life.
Fully sealed shaft: the shaft includes the shaft sleeve, CAP (professional terms, directly translated into CAP), gasket and O type ring seal to ensure that the shaft does not come into contact with the medium in order to improve the shaft life. The design is universal, meeting a high degree of generalization.

Product features
1. High efficiency and energy saving: the working efficiency is 5% higher than that of F chemical centrifugal pump
2. Corrosion resistance: we use high quality raw materials to produce pump components, all of which undergo complete surface processing.

Inquiry Form
Other products